PRODUCT.

The Freestanding guardrail with kickboard is ideal for a rooftop without any parapet on edge. It ensures the collective protection of a new or old building.

The Freestanding rooftop guardrail is a system without fixing weighted by counterweights, exclusively for securing roofing decks not publicly accessible. It is recommended when it is not possible to fix the railing on the parapet or the slab. It ensures the collective protection of a new or old building.

The parapet railing system is designed for areas where non-penetrating guardrail would not work properly. The parapet guardrail system allows for the installer to connect to the existing parapet without penetrating the roof membrane and provides permanent guardrail that does not become a trip hazard while working around equipment.

When a parapet is lower than the safety standards prescribe to safely access a roof, a wall bracket guardrail can be mounted to raise the barrier and create a safe zone. This type of wall bracket railing is either mounted on top or on the inside of the parapet or wall.

Cuando un parapeto es inferior a lo que prescriben l

Z bracket railing is adapted to attach to the parapet below the covering. Therefore the installation of the guardrail does not interfere with the tightness of the parapet, guaranteed by the covering.  Z-type bracket applies several thicknesses of parapet, 70 mm, 130 mm and 160 mm.z bracket guardrail

The permanent guardrail with toeboard is designed for areas where no parapet on edge of wall. This permanent guardrail system provides a barrier that does not become a trip hazard while working around equipment.

The inclined permanent railing system is designed for areas where non-penetrating guardrail would not work properly.The parapet railing system allows for the installer to connect to the existing parapet without penetrating the roof membrane and provides a barrier that does not become a trip hazard while working around equipment.permanent guardrail

Inclined Z type bracket is adapted to attach to the parapet below the covering. Therefore the installation of the guardrail does not interfere with the tightness of the parapet, guaranteed by the covering.  Z-type bracket apply several thickness of parapet, 70 mm, 130 mm and 160 mm.z type bracket guardrail

The inclined temporary guardrail is a system without fixing weighted by counterweights, providing extra protection range than ordinary one. It is recommended when it is not possible to fix the railing on the parapet or the slab. It ensures the collective protection of a new or old building.

When a parapet is lower than the safety standards prescribe to safely access a roof, a wall mounted guardrail can provide a larger safe zone. This type of guardrail is either mounted on top or on the inside of the parapet or wall.